FoxBench DIY roadmap: 13 mini machines to build
The mini machines FoxBench DIY plans to build with 3D printing and Arduino, how they were picked and the order of the first seven videos.
Published

The channel is just getting started, so here is the plan: which machines will be built, why they were picked and in what order. The list will change with viewer feedback, so if there is a machine you want to see first, get in touch.
How machines are picked
A machine makes the list when it:
- Fits the workbench (about 94×50cm) and the backdrop frame.
- Produces a visible result when tested: it cuts, bends, spins or draws something. That is the shot worth watching.
- Has plenty of 3D-printed parts, for CAD and printer timelapse shots.
- Needs at least 2–3 hand operations such as cutting, drilling or soldering.
The theme: tools for the workshop itself
The first few videos build machines that serve the workshop: a turntable, an insert press, a camera slider… Each finished machine is used in the next video, so you see it in real use instead of on a shelf.
The list
Difficulty: ★ easy (1–2 sessions), ★★ medium, ★★★ hard (many test prints, more code).
| # | Machine | Difficulty | Main electronics | Test-run shot |
|---|---|---|---|---|
| 1 | 360° product turntable | ★ | Arduino Nano, 28BYJ-48 stepper | A product spinning slowly on the backdrop |
| 2 | Mini magnetic stirrer | ★ | 12V PC fan, magnets, potentiometer | A vortex in a glass, magnets spinning without contact |
| 3 | Hot-wire foam cutter | ★ | Nichrome wire, 12V supply | Wire slicing through foam like butter |
| 4 | Acrylic heat bender | ★ | Nichrome wire, printed clamps | A clean, sharp 90° bend in acrylic |
| 5 | Motorized camera slider | ★★ | NEMA17, A4988, ESP32 (phone control) | Smooth, slow slide shots |
| 6 | Mini belt sander | ★★ | 775 motor, 12V supply, PWM | Smoothing printed parts |
| 7 | Mini drill press | ★★ | 775 motor, linear rail | Precise vertical drilling |
| 8 | Filament dryer | ★★ | ESP32, temperature/humidity sensor | Humidity graph dropping on a phone |
| 9 | Wire cutter by length | ★★ | Stepper, servo, Arduino | Enter “10 × 15cm”, the machine feeds and cuts |
| 10 | 2-axis pen plotter | ★★★ | 2 steppers, CNC shield, GRBL | The pen drawing the channel logo |
| 11 | CNC wire bender | ★★★ | 2–3 steppers, Arduino | Steel wire bent into letters |
| 12 | Filament respooler | ★★ | Stepper, sensor, Arduino | Filament laid in neat, even layers |
| 13 | Heat-set insert press | ★★ | None (uses an existing soldering iron) | Brass inserts set straight and flush |
Order of the first seven videos
- Product turntable: easy, and used right away for the product shots of every later video. Read the project post.
- Heat-set insert press: a workshop tool for setting brass inserts straight and consistently in the turntable and every machine after it.
- Magnetic stirrer: easy, and the vortex shot is perfect for Shorts.
- Hot-wire foam cutter: cutting shots are the most eye-catching.
- Camera slider: upgrades the channel’s own footage.
- Belt sander: for finishing printed parts on later machines.
- Wire cutter: the first Arduino project with a numeric input interface.
Safety
Some machines on the list use heat or fast-spinning motors. Videos and posts will always carry safety notes. In short:
- Hot wire, heat gun: work on a silicone mat. Printed parts near heat should be PETG or ASA, not PLA (PLA softens at around 60°C).
- 775 motors (sander, drill press): always use a guard and wear safety glasses.
- Mains 220V: use an enclosed power supply and never leave wire ends exposed.
Each finished machine gets its own post under Projects, with the design, parts list, wiring diagram and code.